RELIABLE JUNIPER JN0-664 EXAM TESTKING - JN0-664 RELIABLE EXAM TOPICS

Reliable Juniper JN0-664 Exam Testking - JN0-664 Reliable Exam Topics

Reliable Juniper JN0-664 Exam Testking - JN0-664 Reliable Exam Topics

Blog Article

Tags: Reliable JN0-664 Exam Testking, JN0-664 Reliable Exam Topics, Reliable JN0-664 Exam Pattern, JN0-664 Answers Free, Relevant JN0-664 Questions

If you possess a certificate, it can help you enter a better company and improve your salary. JN0-664 exam braindunps of us will help you obtain your certificate successfully. We are a professional certificate exam materials provider, and we have rich experiences in offering high-quality exam materials. In addition, we have a professional team to collect and research the latest information for JN0-664 Exam Dumps. We offer you free update for 365 days, so that you can obtain the latest information for the exam. And the latest version for JN0-664 exam barindumps will be sent to your email automatically.

To be eligible to take the JN0-664 exam, candidates must have a valid JNCIS-SP certification or possess equivalent knowledge and experience in service provider networking. JN0-664 Exam is computer-based and consists of 65 multiple-choice questions, which must be completed in 120 minutes.

>> Reliable Juniper JN0-664 Exam Testking <<

Juniper JN0-664 Reliable Exam Topics, Reliable JN0-664 Exam Pattern

In today's society, everyone wants to find a good job and gain a higher social status. As we all know, the internationally recognized JN0-664 certification means that you have a good grasp of knowledge of certain areas and it can demonstrate your ability. This is a fair principle. But obtaining this JN0-664 certificate is not an easy task, especially for those who are busy every day. We do not charge extra service fees, but the service quality is high. Your satisfaction is the greatest affirmation for us and we sincerely serve you. Our JN0-664 Exam Guide deliver the most important information in a simple, easy-to-understand language that you can learn efficiently learn with high quality. Whether you are a student or an in-service person, our JN0-664 exam torrent can adapt to your needs.

Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q29-Q34):

NEW QUESTION # 29
Which two statements are correct about VPLS tunnels? (Choose two.)

  • A. LDP-signaled VPLS tunnels only support control bit 0.
  • B. BGP-signaled VPLS tunnels require manual provisioning of sites.
  • C. LDP-signaled VPLS tunnels use auto-discovery to provision sites
  • D. BGP-signaled VPLS tunnels can use either RSVP or LDP between the PE routers.

Answer: A,D

Explanation:
https://www.juniper.net/documentation/us/en/software/nce/feature-guide-virtual-private-lan-service/topics/task/v
https://www.juniper.net/documentation/us/en/software/junos/vpn-l2/topics/concept/vpns-configuring-vpls-routin


NEW QUESTION # 30
You are configuring anycast RP for load balancing and redundancy in your PIM-SM domain. You want to share active sources between RPs.
In this scenario, what are two solutions that will accomplish this task? (Choose two.)

  • A. Configure anycast PIM with the rp-set statement on each RP router.
  • B. Configure anycast PIM with the rp-set statement on each source DR router.
  • C. Configure MSDP on each RP router.
  • D. Configure MSDP on each source DR router.

Answer: A,C

Explanation:
In a PIM Sparse Mode (PIM-SM) domain, Anycast RP is used for load balancing and redundancy by configuring multiple RPs with the same IP address. However, for active multicast sources to be shared between RPs, an additional mechanism is needed since PIM-SM does not automatically synchronize sources between RPs.
Evaluating the Answer Choices
Option A: "Configure MSDP on each RP router." ✅
Multicast Source Discovery Protocol (MSDP) is required in an Anycast RP setup to share active source information between RPs.
MSDP allows RPs to exchange source-active (SA) messages, ensuring that multicast receivers in different regions can still receive traffic from sources registered with different RPs.
Juniper Documentation confirms that MSDP is used to synchronize active sources across multiple RPs in an Anycast RP deployment.
✅ This is a correct answer.
Option B: "Configure anycast PIM with the rp-set statement on each RP router." ✅ Anycast PIM allows multiple RPs to share the same IP address, and the rp-set statement is used to define the set of Anycast RPs.
This enables receivers and sources to register with the closest RP.
However, Anycast PIM alone does not share active source information between RPs; MSDP is still needed for that.
The combination of Anycast PIM (rp-set) and MSDP is the correct approach.
✅ This is a correct answer.


NEW QUESTION # 31
You are configuring schedulers to define the class-of-service properties of output queues. You want to control packet drops during periods of congestion.
In this scenario, which CoS configuration parameter would be used to accomplish this task?

  • A. shaping rate
  • B. buffer size
  • C. priority
  • D. drop profile

Answer: D


NEW QUESTION # 32
When building an interprovider VPN, you notice on the PE router that you have hidden routes which are received from your BGP peer with family inet labeled-unica3t configured.
Which parameter must you configure to solve this problem?

  • A. Under the protocols ospf hierarchy, add the traffic-engineering parameter.
  • B. Under the protocols mpls hierarchy, add the traffic-engineering parameter
  • C. Under the family inet labeled-unicast hierarchy, add the resolve-vpn parameter.
  • D. Under the family inet labeled-unicast hierarchy, add the explicit null parameter.

Answer: C

Explanation:
The resolve-vpn parameter is a BGP option that allows a router to resolve labeled VPN-IPv4 routes using unlabeled IPv4 routes received from another BGP peer with family inet labeled-unicast configured. This option enables interprovider VPNs without requiring MPLS labels between ASBRs or using VRF tables on ASBRs. In this scenario, you need to configure the resolve-vpn parameter under [edit protocols bgp group external family inet labeled-unicast] hierarchy level on both ASBRs.


NEW QUESTION # 33
Exhibit

You are attempting to summarize routes from the 203.0.113.128/25 IP block on R8 to AS 64500. You implement the export policy shown in the exhibit and all routes from the routing table stop being advertised.
In this scenario, which two steps would you take to summarize the route in BGP? (Choose two.)

  • A. Remove the from protocol bgp command from the export policy.
  • B. Add the set protocols bgp family inet unicast add-path command to allow additional routes to the RIB tables. -
  • C. Replace exact in the export policy with orlonger.
  • D. Add the set routing-options static route 203.0.113.123/25 discard command.

Answer: A,D


NEW QUESTION # 34
......

By taking our Juniper JN0-664 practice exam, which is customizable, you can find and strengthen your weak areas. Additionally, we provide a specialized 24/7 customer support team to assist you with any problems you may run into while using our Service Provider, Professional (JNCIP-SP) exam questions. Our Juniper JN0-664 desktop-based practice exam software’s ability to be used without an active internet connection is another incredible feature.

JN0-664 Reliable Exam Topics: https://www.exams-boost.com/JN0-664-valid-materials.html

Report this page